How to Sync FireStick Remote to TV

In today’s era of smart entertainment systems, syncing the FireStick remote with your TV provides a seamless and convenient experience. With Sync FireStick Remote to TV, you don’t have to switch between many remote controls; you can control both FireStick and TV with one device. Whether it’s adjusting the volume, turning the power on/off, or switching inputs, this synchronization can simplify your entertainment settings and enhance your viewing experience. What you need to know is that there are some prerequisites for supporting TV; first, you must have a TV that supports CEC, and second, you should have an Alexa voice remote with power and volume buttons. Follow the detailed steps mentioned in the following article to ensure a smooth synchronization process for your IPTV UK and IPTV subscription.

But, sometimes this process may encounter obstacles, but don’t worry. Troubleshooting methods can help you overcome these obstacles. Please keep your pace and look down!


Why Sync FireStick Remote to TV


Sync FireStick Remote to TV. For easier operation, you don’t need to use separate remote controls for FireStick and TV. When you sync the Firestick and TV, you can adjust the volume, turn it on and off, or switch it over. This allows you to control both of your devices with a single remote control. In short, this operation simplifies your entertainment Settings and provides more convenience to enhance your viewing experience. so that you reduce the confusion caused by having too many remote controls.

Why won’t my Fire TV remote connect to my TV?

If you find that you are unable to pair your FireTV remote. then you need to consider some troubleshooting and re-trying to connect your remote to help you fix the problem.

The first and easiest thing is that you can try to replace the battery, and then keep your remote control no more than 3 fans from your FireTV device. it is recommended that there is no occlusion between. Or you can try unplugging your device and plugging it back in later and booting it up. What you should also know is that you can only pair up to 7 remotes, and if you exceed this number, it will not be successful. So you need to remove one of the remotes to pair. As a last resort, try pairing your remote with a third-party app. Or reset the Fire Stick remote.

How to Connect a New FireStick Remote to TV

In general, the Firestick remote will pair with your TV. turn on your TV and plug the Firestick device into your TV HDMI input port. Make sure it is connected, start the Firestick device, and use the TV remote control with the correct HDMI input source. which is please wait for the remote control to activate.

You can also link your Firestick remote to your TV. You need to do the following:

  • First, press and hold the Home button on the Firestick remote for about 10 seconds.firestick-remote-to-tv
  • Until the LED light on the remote control button starts flashing, which means your remote is searching for a nearby TV that you can connect to.
  • Once you find a TV that matches, connect the TV. The remote control then flashes a blue light. This means that your remote control has been matched to your TV.

Things you need to know before Sync FireStick Remote to TV

What is HDMI ARC?

HDMI ARC stands for high definition multimedia interface audio return channel. This is a feature found in many TVS and sound systems that simplifies the audio connection between the TV and an external audio device. such as a bar speaker, home theater receiver, or speaker system. HDMI ARC is particularly useful for people who want to simplify their home theater setup by reducing the number of cables. and controlling many devices with a single remote control.

What is HDMI CEC

CEC stands for Consumer Electronics Control and is an HDMI function. It allows devices linked via HDMI cables to communicate and control each other. It can control many devices by using a single remote control. So you can change your TV Settings using HDMI-connected devices. It is a valuable feature option.

HDMI ARC or HDMI CEC Setting on Your TV

Each different brand of TV turns on HDMI ARC or HDMI CEC. So the steps will vary depending on your TV model. Here is my list of TV brands that are compatible with Firestick and can use HDMI CEC.

BrandHDMI CEC Name
SharpAQUOS Link
ToshibaCEC Control

How do I control my TV with the FireStick Remote from CEC?

To enable CEC on Firestick and TV you need to do the following:

  1. Have a compatible TV and Firestick device and enable CEC.
  2. Sync Firestick Remote to Control TV Volume.

Check out the step-by-step guide below.

Step 1: Enable the CEC Step Guide on the Firestick device.

  • 1. Start your Firestick device, enter the home screen, and click the “Settings” button in the upper right
  • 2. Next, scroll to “Display & Audio“.display-and-audio-2
  • 3. Scroll down to “HDMI CEC Device Control“,hdmi-cec-3
  • 4. Now it is in a closed state, please click to open it.hdmi-cec-on-4

Step 2: Sync Firestick Remote to Control TV Volume

  • 1. Please click the home button on the Firestick remote control to return to the Firestick main interface. and then click the “Settings” button.
  • 2. Next, scroll to “Equipment Control” and click it.
  • 3. Remote control scroll down and click Manage Equipment.
  • 4. Then select “Add Equipment“.
  • 5. Now click the “TV” option.
  • 6. Next please wait for the setup process, it may take a little time.
  • 7. Now, if your system is recognizing your TV, click “Yes“. Then go to Step 10. If your TV device is not recognized by the screen below, proceed to step 8 below.
  • 8. If your TV is not recognized, click “NO“.
  • 9. OK, next, you will see a list of various TV brands, please choose the brand that matches your TV to connect. Only TVS of the same brand can be connected.
  • 10. Follow the instructions provided on the screen. First, hold down the power button on your Firestick remote, wait 10 seconds, and then hold down the power button here.

11. If the message Did your TV turn off and then back on when you pressed⊙ is displayed. Select “Yes” and skip to Step 15. If there is no response, go to Step 12 below.

  • 12. If your TV does not respond to the button on the Firestick remote control, then you can only select “NO“.
  • 13. In this case, the system will ask you to try the above methods several times until you find the right option. Of course, each user’s schedule and number of attempts may be different. You just need to follow the instructions.
  • 14. Next, try to turn the TV off and on, and click “Yes“.
  • 15. Now, the system will perform a volume test. After adjusting the volume according to your own needs, go to the Next step and click “Next“.
  • 16. Next, use the Firestick remote control to set the volume. If you can do this, click “Yes“. Then skip to Step 19. If not, follow Step 17.
  • 17. At this point, if your Firestick remote control cannot operate the control volume change, then click “No“.
  • 18. Next you will see a menu option to set the selection, if you are not using any external audio devices then select “I use a soundbar”. Start at step 13 and repeat through step 17 until you find the right place for you. If yes, go to Step 20.
  • 19. This step is useful if you have many media devices connected to your TV at this point and are switching between channels. You need to create a shortcut to jump to Firestick’s HDMI channel. Select the HDMI port that FireStick connects to from the list.
  • 20. Now switch to a spare HDMI input source using your traditional TV remote control. and hold down the forward button on your Firestick remote control.
  • 21. Now the TV has switched to the Firestick HDMI channel. If so, select ‘Yes‘. Now you can switch back to FireTV from any HDMI source using the forward button on your Firestick remote!
  • 22. All right! Now all you have to do is click “OK“. You have synced the Firestick remote to your TV.

Video: How to Turn On HDMI CEC to Control Fire TV Cube with TV Remote

HDMI CEC (Consumer Electronics Control) allows you to control many devices connected to your TV with a single remote control. To enable the HDMI CEC to control the Fire TV Cube from your TV, you need to follow these general steps. Keep in mind that the process may vary, depending on the make and model of your TV and Fire TV Cube. Here is a step-by-step guide on how to open HDMI CEC on your TV.

How to change my paired TV

If at this point your TV is changing to another one, this is where you need to change the pairing TV. General Fire TV allows you to pair your Firestick remote back with your new TV. Do the following:

  • 1. On the FireTV home screen, tap the Settings icon in the upper right
  • 2. Please scroll the mouse of your remote control down to “Equipment Control“.equipment-control-2
  • 3. Next click on “Manage Equipment“.manage-equipment-3
  • 4. Now you will see the “TV” option in the menu bar, click on
  • 5. Click “Change TV” to connect the FireStick Remote to the TV. For details, refer to Step 6-23 of the above content.change-tv-confirmation-6
  • 6. All right! The Firestick remote will connect to the new TV. You can now control and navigate your TV with the Firestick remote!

How to pair a new Firestick remote control

In general, Firestick can remember up to 7 Remote controls at the same time. including non-Firestick Remote (third-party remote control). If your current Firestick Remote does not work, it is recommended that you configure the new Firestick Remote.

To replace a new remote for your Firestick Settings. go to Settings > Controllers and Bluetooth Devices > Amazon Fire TV Remote > Add New Remote. Finally, press the Home button on the “new” remote and the Select button on the “old” remote.

The above is a guide to how to Sync the FireStick Remote to a TV. Firestick is a cost-effective and inexpensive device. In the course of use, there may be some information about Firestick Buffering, Firestick Clear Cache, Developer Options on Firestick, Pair Firestick Remote, Unknown Sources on Firestick, How to jailbreak Firestick, Firestick Not Working. update Firestick and Remote, and more. You can learn all about it here, and for other related tutorial guides, you can go to the IPTV tutorial page. For better streaming content, on Firestick you can stop the ISP Blocking IPTV by using a VPN.


How do I sync my Fire Stick remote to my TV?

Go to the home screen Settings and select Controller and Bluetooth device. Select the Amazon Fire TV remote. Press and hold the home button of the remote for about 10 seconds to pair.

How do I reset my Fire Stick remote?

To reset the Firestick remote, you need to do the following:
1. Remove the battery from the remote control.
2. Please press and hold your remote home button for about 15-20 seconds, then release the remote home button.
3. Reinstall the battery in your Firestick remote.
4. Wait until your remote is paired with your Firestick.
For a detailed tutorial guide please see here: Reset Firestick remote Control.

How do I connect my Firestick to my TV?

First, you need to plug the FireTV Stick into your TV’s HDMI port. Then plug the power adapter into the outlet to ensure power is available and start your TV. At this point, make sure your Firestick remote is working, then follow the on-screen instructions to set up your Fire TV Stick.

Final thoughts

All in all, Sync FireStick Remote to TV can simplify your entertainment control without worrying about having to use many remote controls to upset you. Follow the steps and troubleshooting tips in the above article to resolve the issue of syncing your FireStick remote to your TV. You can pair your remote with your TV to ensure a smooth viewing experience. Say goodbye to the chaos of using many remotes and enjoy the ease of syncing FireStick remotes to your TV. What are you waiting for? Please contact us if you have any questions.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *